10
User Settings
Bowens.co.uk XMTR user guide
User Settings
User Settings
To select and adjust user settings:
1. Press and hold the CHN/SET button to enter the user settings menu.
2. Use the scroll wheel to find the required option.
3. Press the GRP/SELECT button to select required option. Active value flashes.
4. Use the scroll wheel to select the required value / setting.
5. Press the GRP/SELECT button to confirm the value / setting.
6. Pres the CHN/SET button to exit user settings.
The following is a list of the available user settings:
SETTING DESCRIPTION
Strobe Turns Strobe On / Off
Sync Delay Set sync delay between 1 - 10ms.
Always On Prevents the trigger from going into standby mode.
OPTIONS
On / Off
Off, 1 - 10ms
On / Off
PC Sync PC Sync connects with Camera (in) or Flash (out). Camera / Flash
Beep Turn ready beep on / off. On / Off
Contrast Adjust contrast of the LCD screen. 1 - 9
To Next Page
Loading...