EasyManua.ls Logo

Bowens XMTR - Safety Instructions; Precautions and Safety Guidelines; Radio Frequency Information; Final Disposal Instructions

Bowens XMTR
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Table of Contents
Bowens.co.uk XMTR user guide
Safety Instructions
Precautions
Always study and understand this user guide and accompanying safety instructions before
using this unit.
Bowens products are intended for photographic use only and should not be used for any other
purpose.
Equipment should only be serviced, modified or repaired by authorised and competent service
personnel.
Environmental Safety
Do not place or use the unit where it could be exposed to moisture, dripping, splashing, extreme
electromagnetic fields or in areas with flammable liquids, gases or dust.
Do not expose the unit to rapid temperature changes in humid conditions as this can lead to
internal condensation.
When transporting the unit between cold and warm conditions always allow the unit to
acclimatise for at least two hours before connecting to the mains.
Radio Frequency - This equipment makes use of the radio spectrum for triggering and remote
control and therefore receives and emits radio frequency energy. Ensure that all specifications
within this document are followed, especially those concerning operating temperature and supply
voltage range. Make sure that the unit is operated according to local regulations. The frequency
spectrum that this unit uses is shared with other users so interference either with this unit or with
other users is possible.
Final Disposal - This unit contains electrical and electronic components that could be harmful
to the environment. Follow local legal requirements for disposal of waste, for instance WEEE
directive for electrical and electronic equipment on the European market at the end of the product
life.