To Next PageTo Next Page
Need help?Do you have a question about the Bowers & Wilkins 800 Diamond and is the answer not in the manual?
General| Type | 3-way vented-box system |
|---|---|
| Frequency Response | 34Hz to 28kHz (±3dB) |
| Sensitivity | 90dB spl (2.83V, 1m) |
| Nominal Impedance | 8Ω (minimum 3.0Ω) |
| Recommended Amplifier Power | 50W - 500W into 8Ω on unclipped programme |
| Crossover Frequencies | 350Hz, 4kHz |
| Frequency range | -6dB at 25Hz and 33kHz |
| Max. recommended cable impedance | 0.1Ω |
| Tweeter | 1x 25mm (1 in) Diamond dome tweeter |
| Midrange | 1x 150mm (6 in) Continuum cone FST midrange |
| Dispersion Vertical | Over 10º arc |
Advice on speaker placement and room acoustics for optimal sound.
Notes on product compliance with RoHS and WEEE directives for responsible disposal.
Guidelines for positioning speakers in stereo setups for best imaging.
Recommendations for speaker placement in home theatre systems for scale.
Precautions regarding magnetic fields emitted by speakers affecting sensitive devices.
Crucial safety advice regarding speaker connections, plugs, and mains sockets.
Explains bi-wiring and bi-amplification connection methods for improved audio.
Notes on keeping magnetically sensitive items away from speaker's magnetic fields.
