Do you have a question about the Bowers & Wilkins 803 and is the answer not in the manual?
Max. recommended cable impedance | 0.1Ω |
---|---|
Crossover frequency | 350Hz, 4kHz |
Drive units | 1x 25mm diamond dome tweeter, 1x 150mm Continuum cone FST midrange, 2x 180mm Aerofoil cone bass |
Sensitivity | 90dB spl (2.83V, 1m) |
Impedance | 8Ω (minimum 3.0Ω) |
Tweeter | 25mm (1in) diamond dome |
Midrange | 1x 150mm Continuum cone FST |
Bass | 2x 180mm Aerofoil cone |
Finish | Rosenut, Gloss Black, Satin White |
Type | 3-way vented-box system |
Harmonic distortion | <1% (90Hz - 20kHz, 90dB at 1m) |