To Next PageTo Next Page
Need help?Do you have a question about the Bowers & Wilkins 801 D4 and is the answer not in the manual?
General| Model | 801 D4 |
|---|---|
| Brand | Bowers & Wilkins |
| Category | Speakers |
| Type | Floorstanding |
| Sensitivity | 90dB spl (2.83Vrms, 1m) |
| Nominal Impedance | 8Ω (minimum 3.0Ω) |
| Minimum Impedance | 3.0Ω |
| Tweeter | 1x 25mm (1in) Diamond dome high-frequency |
| Midrange | 1x 150mm (6in) Continuum cone FST midrange |
| Frequency Response | 15Hz to 28kHz |
| Recommended Amplifier Power | 50W - 1000W |
| Woofer | 2x 250mm (10in) Aerofoil cone bass |
| Weight | 100.6kg |
| Finish | Gloss Black, Satin White |
| Harmonic Distortion | Less than 0.3% (100Hz - 20kHz) |
Guidance for safely unpacking heavy speakers and preventing damage.
Details product compliance with international environmental directives.
Information on the decoupled tweeter assembly and its initial adjustment.
Instructions for floor mounting, spike adjustment, and stabiliser fitting for optimal placement.
Warning regarding sharp spikes and safe handling during installation.
Optimal speaker placement for stereo and home theatre systems.
Safety advice for audio connections and recommendations for speaker cables.
Instructions for connecting speakers to the amplifier, including bi-wiring and polarity.
Methods for adjusting sound by repositioning speakers and considering room acoustics.
Information on the initial listening period and how speakers adapt to conditions.
Guidance on cleaning and maintaining speaker surfaces, including wood and leather.
Instructions on how to find and access product identification numbers and compliance details.
