To Next PageTo Next Page
Need help?Do you have a question about the Bowers & Wilkins 804 D4 and is the answer not in the manual?
General| Type | 3-way vented-box system |
|---|---|
| Description | Floorstanding loudspeaker |
| Sensitivity | 89dB spl (2.83Vrms, 1m) |
| Nominal Impedance | 8 Ohm |
| Minimum Impedance | 3.0 Ohm |
| Drive Units | 1x 130mm (5in) Continuum cone FST midrange |
| Finish | Gloss Black |
Lists all components included in the product packaging for the 805 D4 and 804 D4 models.
Details product compliance with international directives like RoHS, REACH, and WEEE.
Instructions for floor mounting and shelf placement, including spike/rubber foot adjustments.
Guidance on optimizing speaker placement for stereo and home theatre systems.
Crucial safety warnings regarding audio equipment connections and cable types.
Details on bi-wiring, single-wire connections, and correct polarity for amplifier hookup.
Adjustments for bass volume, resonance, and stereo image based on room acoustics.
Explanation of the initial period where speaker performance subtly changes and requires break-in.
Tips for balancing room acoustics with soft furnishings to optimize sound brightness.
Instructions on how to carefully remove grilles and clean speaker surfaces.
Information on the subtle changes in speaker performance during the initial listening period and time estimates.
