To Next PageTo Next Page
Need help?Do you have a question about the Bowers & Wilkins PV1D and is the answer not in the manual?
General| Impedance | 100 Ω |
|---|---|
| Down-firing | No |
| Subwoofer type | Active subwoofer |
| Number of subwoofers | 2 |
| Subwoofer sensitivity | 100 dB |
| Subwoofer driver diameter | 200 mm |
| Subwoofer frequency range | 6.5 - 570 Hz |
| Subwoofer crossover frequencies | 7.5 - 450 Hz |
| Subwoofer driver diameter (imperial) | 8 \ |
| Line-in | Yes |
| Power source type | AC |
| Power consumption (standby) | 1 W |
| Power consumption (typical) | 150 W |
| Display | LED |
| Material | Aluminium, Kevlar |
| Product color | Black |
| Speaker enclosure | Closed |
Weight and Dimensions| Subwoofer depth | 358 mm |
|---|---|
| Subwoofer width | 342 mm |
| Subwoofer height | 270 mm |
| Subwoofer weight | 18700 g |
Instructions for safe connection and operation of the mains powered apparatus.
Describes the PV1D's high-performance low-frequency reproduction and versatile features.
Details setting up and operating the PV1D via front panel or SubApp software.
Explains the availability of line level and speaker level inputs for connection.
Covers setting input sensitivity, level, polarity, and gain for optimal audio performance.
Describes matching the subwoofer's output to main speakers by setting sensitivity.
Mentions four equalisation options for different applications and AV enhancement.
Explains five memory locations for storing and recalling setup parameters.
Lists the component parts packed with the subwoofer and provides unpacking advice.
Provides guidance on optimal placement for the PV1D in a listening environment.
Connects to integrated amplifiers without line level outputs using a special cable.
Connects to pre-amplifiers or integrated amps with line level outputs.
Describes the PV1D's front panel display and buttons for setup and operation.
Configures display brightness and timeout to reduce visual distraction during operation.
Sets auto standby, trigger control, or RS-232 for power management.
Enables selection of two presets via a 12V control signal on the Trigger 2 input.
Provides access to all audio setup parameters for the PV1D.
Displays the PV1D model number and internal software (firmware) version.
Selects between Line and Speaker level inputs for configuration.
Matches subwoofer sensitivity to main speakers by setting sensitivity value.
Adjusts Sensitivity, Gain, and Polarity for optimal signal-to-noise performance.
Loads one of the five stored presets for editing or recall.
Enables preset parameters to be changed.
Saves edited preset parameters to a specified location, overwriting existing data.
Covers input, level, low-pass filter, and system EQ parameters adjustable within presets.
Recommends using the supplied cloth for dusting cabinet surfaces; avoid harsh cleaners.
Procedure to save current settings to an XML file or internal memory.
Procedure to restore saved settings from internal memory or XML file.
Procedure to reset the PV1D to its original factory default settings.
Details electrical safety and FCC compliance for North American regions.
Declares compliance with EU EMC and Low Voltage Directives for the PV1D.
