Bowflex Boost - Features and Getting Started; Charging the Bowflex Boost Device

User’s Manual
3
Clasp
LED
Button
Charging Nodes
Charging Nodes
Charging Pod
USB Cable
Features / Getting Started
1. Charging the Bowflex Boost
™
Device
The Bowex Boost
™
device is equipped with a quick charge (one
hour), rechargeable battery.
1. Remove the USB cable from the Charging Pod.
2. Attach the magnetic Charging Nodes on the Charging Pod to the
device.
3. Plug the USB Cable into a USB Port that has power supplied to it.
The red LED will activate.
Note: The device should be fully charged in approximately an hour,
and will activate the Green LED. It is recommended to recharge the
device every day or two to be sure of no gaps in activity recording.
Do not leave the device plugged into the Charging Unit for an extend-
ed period of time. Be sure to remove it once the Green LED is active.
™
1
2
3
Settings Tab
Current Day Tab
Past Totals Tab
App display:
Module
Bluetooth
®
icon
Sync icon