9 | P a g e
ADJUSTING THE FOOTREST POSITION
Similar to the seat, the footrest may also be
adjusted to an appropriate length for each
individual user.
It is secured in place by 2 screws.
To move the footrest:
i. The 2 screws located on either side of
the footrest frame must be loosened.
A 5 mm Hex Key should be used to
loosen/remove these screws.
ii. The footrest may now be slid forward
or backward to lengthen or shorten
this distance.
iii. Once the footrest is in a comfortable
location for riding the 2 screws must
be tightened (10Nm torque) to secure
the new position.
To Next Page
Loading...
