8 | P a g e
Adjusting for comfort and Safety
The following steps are critical for your comfort and safety and must be performed before your
first bike ride.
ADJUSTING THE SEAT POSITION
The seat is adjustable to slide along the frame
rails to accommodate various user height
requirements.
It is secured in place by 4 screws.
To move the seat plate:
i. The 4 screws located on the bottom of
the rail mount must be loosened.
A 5 mm Hex Key should be used to loosen
these screws.
ii. The entire seat assembly may now be
slid forward and backward to reach a
comfortable position.
iii. After locating the seat in the
appropriate position, the 4 screws must
be torqued to 12Nm to secure the seat
in its’ new location.
To Next Page
Loading...
