BOXER 63022 - Setting Door Positions and Power

13
3. Setting the opening/closing power
The opening/closing power can be set from 1 to 8. The default setting is 3.
Setting the opening power: Press the SET button three times until the display
showstheupperpartofagure8.PresstheARROWUPbuttontoincrease
the power, or press the ARROW DOWN button to reduce the power.
Once you have chosen your preferred power setting, press the SET button to
save the setting. The motor now automatically switches to the power setting
forclosing.Thedisplayshowsthelowerpartofagure8.
The closing power can be set from 1 to 8. The default setting is 2.
Press the ARROW UP button to increase the power, or press the ARROW
DOWN button to reduce the power. Once you have chosen your preferred
power setting, press the SET button until the displays shows “0”. This means
that the closing power is now set.
4. Setting automatic door closing:
How to turn on automatic door closing:
Press the SET button 5 times until the display shows “A”. Press the ARROW
UPbutton.Thedisplayshowsaashing“H”.Thismeansthatautomaticdoor
closing is on.
How to turn off automatic door closing:
Press the ARROW DOWN button on the control panel until the display
constantly shows “H”. This means that automatic door closing is off.
Press the SET button to save all settings. (Automatic door closing is set to off
by default from the factory.) If you do not need automatic door closing, simply
leave the factory default setting unchanged.
Automatic door closing happens by default after 5 minutes. This time setting
cannot be changed.