REC
Onboard Recording
• Press the transmitter’s button to enable the onboard recording. Or
activate the “Auto Recording” mode so that the transmitter can start
recording audio as soon as it is switched on.
• The memory can store up to 15 hours of recording at the 48kHz/ 24bit
sampling rate.
• The file will be automatically split after 30 minutes of recording, making
it easy to quickly find your desired recording segment.
• By default, the recording files are named in the format "DATE-TIME.-
WAV". Up to 999 recording files can be created.
• If the 8GB memory is full, the original file will be automatically
overwritten with the latest file from the beginning.
HINT:
Note that in this mode, the "mute" function will not aect the onboard
recording.
The recording files cannot be read when the onboard recording is on.
The onboard recording will be disabled automatically once the
transmitter is placed in the charging case.
NOTE:
If a certain transmitter of BOYAMIC failed to pair, please turn o the
paired transmitter, and then reconnect the unpaired transmitter and
receiver.
Due to the 2.4GHz wireless frequency is widely used, the signal may be
easily attenuated or interfered. Please try to avoid obstacles while using,
such as walls and buildings. And keep away from the devices with 2.4GHz
frequency, such as high-power Wi-Fi antennas, radios, etc.
To Next Page
Loading...
