BR 750 PROFESSIONAL – Water Detector Page 8
After the automatic scan is finished between all probes, the measurement results
are shown on the screen. To examine the measurement results in detail and learn
depth information, select the lines.
The results screen shows the results of all lines. If no water is detected, it is
shown as “NO WATER”.
If there is disconnection between the cables supplied with the product and any
disconnection between the cables, on the device scan screen you will see “NO
CONNECT”.
According to the results of the measurements taken, you can see them as different
options like; Mineral Water, Salt Water and Potable Water on the screen.
For the graph and depth information of the measurements, in the search result
screen, if there is a detected water line, you can reach the detail page by selecting
this line.
To Next Page
Loading...