BR 750 PROFESSIONAL – Water Detector Page 7
1.2 AUTOMATIC SCAN
On the search screen, press the OK button on the AUTO search option. It will
start taking a total of 6 measurements between 4 probes. Respectively as follows;
It scans between; Probes 1 and 2,
Probes 2 and 3,
Probes 3 and 4,
Probes 1 and 4,
Probes 1 and 3,
Probes 2 and 4,
and the result is shown on the screen. Between which probes are being scanned,
the LED lambs those belongs to these probes are on. At the same time, on the
evice screen it is shown that between which probes are being scanned. Please see
the images below.
During the scan you can see the line in which the scan is made.
To Next Page
Loading...