What to do if my Brada Appliances YPL3-10C Air Conditioner does not function?
If your Brada Appliances Air Conditioner isn't working, first ensure it's properly connected to a power supply and switched on. If 'FL' is flashing on the display, drain the water. Also, if the timer-off function is running, wait three minutes before turning the unit back on.
Why does my Brada Appliances Air Conditioner restart frequently?
If your Brada Appliances Air Conditioner restarts frequently, there might be a few reasons. Check if it's in direct sunlight and, if so, close the curtains. Also, ensure that windows and doors are closed, and remove any heat sources from the room. A dirty filter could also be the cause, so clean or replace the filter(s). Finally, make sure that neither the air inlet nor the air outlet is blocked; if they are, remove the blockage.
How to make my Brada Appliances YPL3-10C Air Conditioner unit less noisy?
If your Brada Appliances Air Conditioner unit is too noisy, ensure it is placed on an even, solid surface to reduce vibration.
Instructions on how to test the LCDI power cord and plug for proper function and safety.
Critical warnings regarding the use and handling of the LCDI power cord and plug to prevent hazards.
Specific advice for installation and operation to ensure user safety and prevent appliance damage.
Guidelines for choosing a suitable and safe place to set up the air conditioner for efficient operation.
Detailed instructions for connecting the exhaust pipe, adapter, and window slider kit.
Identification of components visible on the front of the air conditioner unit.
Identification of components located on the back of the air conditioner unit.
Explanation of the purpose and operation of each button on the air conditioner's main control panel.
Detailed description of each button's function on the provided remote control.
Instructions for using the cooling function, setting temperature, and fan speed.
Guidance on operating the unit solely in fan-only mode.
Explanation of how the unit automatically selects between cooling and fan modes based on room temperature.
Details on activating the sleep mode for quieter operation and gradual temperature adjustment.
How to engage the maximum cooling mode for rapid temperature reduction.
Instructions for setting the automatic timer for unit activation or deactivation.
Safe procedures for cleaning the exterior surfaces of the air conditioner.
Steps for cleaning the air filter to ensure optimal performance and air quality.
A table listing common problems, their causes, and recommended solutions for the air conditioner.
General| Brand | Brada Appliances |
|---|---|
| Model | YPL3-10C |
| Category | Air Conditioner |
| Language | English |
To Next Page
