To Next PageTo Next Page
Need help?Do you have a question about the Bradco 511 and is the answer not in the manual?
Operator's primary responsibility for safety and understanding manual.
Use only manufacturer replacement parts for product maintenance and repairs.
Read manual, know equipment, wear safety gear, and follow all safety instructions.
Precautions for operating, transporting, and maintaining the backhoe safely.
Diagrams show locations of all decals used on the 500 series backhoes.
Manual provides information and instructions for setting up, operating, and maintaining the backhoe.
Ensure operator understands safety and operating instructions; park on level ground.
Details available severe duty power dig bucket assemblies and capacities.
Diagram of backhoe components to identify names for reading manual or ordering parts.
Details operation of four control levers for backhoe functions: stabilizers, boom, dipper, and bucket.
Planning the excavation, inspecting the site, and understanding job requirements before digging.
Procedure for effective digging, including bucket entry angle and cycle repetition.
Guidance for specific tasks like trenching between buildings and open excavations.
Procedure for safely transporting the backhoe, including engaging locks and raising stabilizers.
Visual guide to all backhoe lubrication points and recommended intervals for maintenance.
Covers lubrication every 8 hours and hydraulic fluid checks every 40 hours.
Details on control valve, bucket teeth, and bucket replacement.
How to change bucket link mounting for different digging requirements.
Diagrams illustrating hydraulic hose connections for troubleshooting cylinder and valve issues.
Detailed steps for disassembling threaded type glands and cylinder rods.
Instructions for installing new seals, piston, and securing the rod assembly.
Wash unit, coat cylinder rods with grease, lubricate fittings, and seal hydraulic system.
Addresses problems with backhoe lift/swing capability and speed, including oil, pump, and linkage issues.
Covers load holding, oil heating, leaks, and control valve performance issues.
Troubleshooting external leaks, swing cylinder issues, and sticking control valves.
Table of torque specifications for various SAE bolt sizes and grades.
Table of torque specifications for various metric bolt sizes and grades.
Diagram and table detailing transport and operational dimensions of the 509 and 511 backhoes.
Specifications for backhoe cylinders (bore, stroke, rod diameter) and bucket capacities and teeth.
Checklist for dealers covering backhoe inspection, mounting, and customer instruction.
Ensuring correct installation and owner's understanding of manual and operation.
Covers excluded products, warranty period, repair/replace options, and return of defective parts.
Details limitations on express/implied warranties and liability for consequential damages.
General| Brand | Bradco |
|---|---|
| Model | 511 |
| Category | Compact Excavator |
| Language | English |
