To Next PageTo Next Page
Need help?Do you have a question about the Bradford White Eco-Magnum Series and is the answer not in the manual?
General| Category | Water Heater |
|---|---|
| Manufacturer | Bradford White |
| Fuel Type | Natural Gas or Propane |
| Vent Type | Power Vent |
| Series | Eco-Magnum |
| Type | Tank |
| Capacity | 50, 75, 100 gallons |
| Recovery Rate | Varies by model |
| Energy Factor | Varies by model |
| First Hour Rating | Varies by model |
| Dimensions | Varies by model |
| Weight | Varies by model |
General overview of the service manual's purpose and target audience.
Lists the essential tools needed for performing maintenance and repairs on the water heater.
Details LED error codes, probable causes, and recommended service procedures for gas control issues.
Step-by-step guide for safely removing the inner door and burner assembly.
Instructions for inspecting the gasket for damage and procedures for its replacement.
Steps for correctly re-installing the inner door and burner assembly after service.
Method for testing thermopile function using a closed circuit measurement with a multimeter.
Method for testing thermopile function using an open circuit measurement with a multimeter.
Detailed steps for replacing the thermopile, including safety precautions and connections.
Procedure for inspecting, cleaning, and replacing the pilot assembly and electrode.
Guide for testing the igniter and electrode circuit and steps for replacement if needed.
Procedure for testing manifold gas pressure to ensure proper operation.
Steps to test and reset the Energy Cut Out (ECO) safety device on the gas control.
Step-by-step instructions for removing and installing a new gas control unit.
Guidelines for inspecting and cleaning the main burner for optimal performance.
Detailed steps for cleaning the burner screen, venturis, and orifices.
Procedure to test the continuity of the resettable thermal switch using a multimeter.
Steps for replacing the resettable thermal switch, including disconnection and reconnection.
Instructions for inspecting and replacing the water inlet dip tube for proper function.
Guide for inspecting the anode rod for depletion and recommending replacement when necessary.
