Bradford White RE2H50R10B-1NCWT User Manual

49-50301 08-14
Important Safety Information ...2-4
Operating Instructions
Control Panel ..........................................5
Powering Unit ......................................... 6
Temperature Setting ............................7
Operational Modes ...............................8
Frequently Asked Questions (FAQ) ..9
Care and Cleaning ........................... 10
Installation Instructions ................ 13
Troubleshooting Tips ...................... 19
Write the model and serial
numbers here:
Model # ________________
Serial # _________________
You can nd them on the rating label
on the front side of your water heater.
RE2H50R10B-1NCWT
RE2H80R10B-1NCWT
Owner’s Manual &
Installation Instructions

ré


í
Manuel d’utilisation
et d’installation
Manual del propietario
e instalación
La section française commence à la page 24
La sección en español empieza en la página 46


Printed in USA

Bradford White RE2H50R10B-1NCWT Specifications

General

Brand	Bradford White
Model	RE2H50R10B-1NCWT
Category	Water Heater
Language	English

Summary

Important Safety Information

Water Temperature Adjustment

Explains risks of high water temperatures and how to adjust settings safely.

Water Temperature Settings

Adjusting Water Temperature

Operational Modes Explained

Care and Cleaning Procedures

Installation Instructions

Local Installation Regulations

Ensures compliance with local codes, utility standards, and National Electrical Code.

Water Supply and Drain Connections

Water Supply Connections

Details on connecting hot and cold water lines, including shut-off valves.

Condensation Drain Connection

Instructions for connecting the condensate drain to a suitable outlet.

Safety Devices and Filling Procedures

Relief Valve Installation and Requirements

Guidelines for installing the temperature and pressure relief valve.

Filling the Water Heater

Procedure for filling the tank with water before powering on to prevent damage.

Electrical Connections and Sizing

Electrical Connections

Instructions for making electrical connections to the junction box.

Branch Circuit Sizing Guide

Table providing recommendations for circuit breaker amperage and wire gauge.

Troubleshooting Common Issues

Advanced Troubleshooting and Fault Codes

Error Codes and Smells

Explains specific fault codes (F11, bAd linE, F13, F14) and addressing odors.

Fault Code Diagnostics (Part 1)

FC, Fd, FE, FF, FG, FI*, FJ Faults

Details on fault codes related to evaporator, compressor, and EEV operation.

FL, F2, F3, F4, F5, F6, F7 Faults

Covers fault codes for defrost, tank temperature, compressor, fan, and sensor failures.

Fault Code Diagnostics (Part 2)

F8, F9, F10, F11, bAd linE, F13 Faults

Explanation of faults related to ambient temp, heating elements, dry tank, and stuck key.

F14, F15, F18, F19, F20, F21, F22, F23 Faults