To Next PageTo Next PageWhat to do if the Bradley Smoker oven is too hot?
If your Bradley Smoker oven gets too hot and displays a warning, it means the internal temperature has exceeded 180°F (356°F). To resolve this, allow the temperature to drop below 170°F (338°F), then press the rotary dial to cancel the alarm.
What to do if Bradley Smoker bisquette is jammed?
If your Bradley Smoker displays 'PLEASE CHECK YOUR SMOKER, JAMMED BISQUETTE', it indicates that the turntable rotation hasn't been detected for one minute. To fix this, clear the bisquette jam.
What to do if Bradley Smoker meat probe is not connected?
If your Bradley Smoker displays 'MEAT PROBE 1 /2 NOT CONNECTED', it means the smoker has detected a probe failure or lost connection during the process. Check the sensor and its connections to resolve this issue.
What to do if Bradley Smoker meat probe 1 is not connected properly?
If your Bradley Smoker displays 'MEAT PROBE 1 NOT CONNECTED PROPERLY', it means the system has detected partial resistance from the probe. To fix this, disconnect and reconnect the probe properly.
What to do if Bradley Smoker meat probe 2 is not connected properly?
If your Bradley Smoker displays 'MEAT PROBE 2 NOT CONNECTED PROPERLY', it indicates that the system detects partial resistance from the probe. Disconnect and then reconnect the probe properly to resolve this.
Why are all the controls disabled on my Bradley Smoker?
If your Bradley Smoker displays 'ALL THE CONTROLS HAVE BEEN DISABLED. PLEASE CLOSE THE DOOR BEFORE CONTINUING THE OPERATION', it means the cabinet door is open. Closing the door will make all functions available again.
How to fix heat element failure on Bradley Smoker?
A 'HEAT ELEMENT FAILURE' message on your Bradley Smoker indicates that the cabinet temperature increase is less than 8 degrees during a 5-minute period, and the inner temperature is less than 80% of the set point value. The suggested solution is to change the faulty heating element.
How to fix bisquette burner failure on Bradley Smoker?
A 'BISQUETTE BURNER FAILURE' message on your Bradley Smoker indicates that the burner temperature is less than 100 degrees and has increased less than 3 degrees within a 1-minute period. The suggested solution is to change the faulty heating element.
What to do if Bradley Smoker shows cabinet temperature sensor failure?
A 'CABINET TEMPERATURE SENSOR FAILURE' message on your Bradley Smoker indicates that the smoker has detected a sensor failure or has lost connection with it. Check the sensor and its connections.
What to do if Bradley Smoker shows bisquette burner temperature sensor failure?
A 'BISQUETTE BURNER TEMPERATURE SENSOR FAILURE' message on your Bradley Smoker indicates that the smoker has detected a sensor failure or has lost the connection. Check the sensor and its connections.
General| Brand | Bradley Smoker |
|---|---|
| Model | BS1019 |
| Category | Smokers |
| Language | English |
Essential safety measures for operating the smoker, including handling and avoiding hazards.
Guidelines for safe use of the power cord and extension cords with the smoker.
Warnings about carbon monoxide and the need for adequate ventilation during operation.
Step-by-step guide for assembling the smoker from its parts.
How to adjust temperature, cook time, smoke time, and use the rotary dial.
Explanation of common error codes and their suggested remedies.
Procedure for replacing the main heating element in the smoker.
Details of the limited warranty, its requirements, coverage, and exclusions.
