Bradman Lake HS - Page 3

HS Former
- 3 -
11.5 To Fit To The Frame Gate 44
11.6 To Fit The Hopper Back Plate 44
11.7 To Fit The Agitator Rods 44
11.8 To Fit The Guide Rods 44
11.9 To Change The Vacuum Cup Assembly & Feed Bar 44
11.10 To Renew The Vacuum Cups 45
11.11 To Change The Plunger & Forming Tools 45
11.12 To Change The Hopper Gate 46
12.0 GUIDELINES FOR CARTONS 47
12.1 Introduction 47
12.2 Manufacture Of Top Load Cartons 47
12.3 Handling & Storage Of Cartons 48-49
12.4 Packing Carton Blanks For Transit 50
APPENDIX
Recommended Spares List
Mechanical Assembly Drawings
Electrical Schematics