Bradman Lake HS - Safety First; Put Safety First; Local Safety Aspects

HS Former
- 7 -
3.0 - SAFETY FIRST
3.1 - PUT SAFETY FIRST:
The machinery described in this manual has been designed for the sole purpose of
packaging the specified product. Any other products must be approved beforehand by
Bradman-Lake Inc. Packaging of unsuitable products could result in damage to the
machinery and injury to the operator.
Suitable doors, guards and electrical safety devices are fitted to all Bradman-Lake
machines. These protective features are designed for the safety of the operator and are
tested in our plant before the machine is shipped.
The design of the guards and safety devices all follow the recommendations of OSHA and
satisfy the requirements of the Machinery Directive. The functions of the components must
not be altered in any way and they must not be replaced by alternative items.
3.2 - SAFETY ASPECTS OF LOCAL OPERATING INSTRUCTIONS:
Before delivery of your machine, prepare general operating instructions for the use of the
machine. The operating instructions must meet any requirements for:
 Compliance with local safety regulations and codes.
 Protection of employees against bodily injury, e.g. hard hats, gloves, safety glasses,
hearing protection etc. as required for local conditions.
 Protection of employees against hazards such as hot surfaces etc.
 Maintaining clear visibility of DANGER, WARNING and CAUTION notices and
labels.
 Advisory indicating systems to alert employees near the machine that it is ready to
be started.
 Piping all vents on pressure equipment to a safe location.