Bragi B1000 User Manual

BRAGI
high
full
medium
low
high
medium
low
With The PerfectFit you should feel The Dash
completely closing off your ear canal while it sits
snugly in your ear.
Achieving The PerfectFit may require some adjust-
ment. To adjust you can use one hand to lift up in
your ear and adjust with the other. By doing this
you should be able to press the upper part of The
Dash into a locked position as shown in the dia-
gram above.
To activate The Dash connect The
Charger including The Dash to your
computer via the USB Cable.
The Dash is activated when the
LightGuide flashes blue. You may
now safely eject and disconnect
at any time.
Download the Bragi App on
bragi.com
Register your Dash through the
bragi app to get full suppor t.
Before you get started
Activate the Dash
To charge the battery, connect The Charger to
your Computer or another power source via USB
The Charger fully charges The Dash up to 5 times
while on-the-go.
Place The Dash in The
Charger and make sure
it sits on the MagSnap.
Shake The Dash
And you will see the current
battery status of your Dash.
Check out the LED on the side of The Charger to see the
current battery status. The Dash needs to be placed in
The Charger or The Charger needs to be connected to a
power source.
Take The Right Dash, tilt it slightly forward and
insert the speaker tip into your ear canal.
Adjust to a PerfectFit by rotating The Dash back-
wards until it feels comfortable and secure in your
ear.
Bragi App
Download it
Customize
Download the free Bragi App now
to personalize and set up your Dash
bragi.com/app
The Dash is already fitted with XS
FitSleeves. Try different sizes to
find your PerfectFit.
The PerfectFit is important to ma-
ximise performance of The Dash
and accuracy the DataHub.
How to check the battery
The Dash & Charger
How to insert
The Dash
How to wear
The PerfectFit
How to change
The FitSleeves
Download from
Windows Phone Store
L
M
S
XS
How to charge
The Dash & Charger

Bragi B1000 Specifications

General

Brand	Bragi
Model	B1000
Category	Headphone
Language	English

Summary

Getting Started with The Dash

Activate The Dash

Activate The Dash by connecting The Charger to your computer via USB cable until the LightGuide flashes blue.

Charging The Dash

Connect The Charger to a power source via USB to charge The Dash and Charger. The Charger can recharge The Dash up to 5 times.

Checking Battery Status

Check battery status by shaking The Dash or viewing the LED on The Charger, which indicates current charge level.

Inserting The Dash

Insert The Right Dash into your ear canal, tilting slightly forward, then rotate backwards for a secure fit.

Achieving PerfectFit

Achieve a PerfectFit by ensuring The Dash seals the ear canal and fits snugly. Adjust by lifting the ear and pressing the upper part.

Changing FitSleeves

Try different FitSleeve sizes to find your Perfect Fit for optimal performance and DataHub accuracy.

Using The Dash

Dash Interaction Controls

Learn basic touch controls for Left and Right Dash for music playback, call handling, and activity management.

Bluetooth Connectivity

Enter pairing mode by holding The Right Dash for 5 seconds, then select The Dash in your device's Bluetooth settings.

Package Contents & Setup

What's Inside the Box

Contents include The Dash, The Charger, FitSleeves, and a USB to Micro USB Cable.

Manual & Registration

Visit bragi.com/support to reveal full features and register your device for comprehensive capabilities.

Safety and Compliance

Regulatory Statements

Information regarding CE, FCC, and IC compliance, including operational conditions and RF exposure requirements.