GB
RREESSEETT
Reset: With the readiness for reset (SET) flashing press the
rotary pushbutton for approx. 5 seconds, until the
unit restarts.
Note: re-setting will automatically reset the control to
dutch (NL)
SSYYSSTT
Parameter reset
With this function all changes made in the programming levels
can be reset to the factory setting.
Exceptions: Time-date, operating times
SSEETT
PPAARRAAMM.. RREESSEETT
SSYYSSTT
Important: A reset should only be made if all individually
entered values are to be replaced by the fac-
tory settings!
!
Page GB-26
To Next Page
Loading...
