37
Knifonium
Plugin Manual
1
Resetting
Besides the trashcan icon, you can use the “Reset” button at the top of the synth
GUI to unassign all midi CCs in one click.
2
Reading
Use the “Read” button to load a previously saved controller assignment.
3
Storing
You can use the “Store” button to save the controller assignment in an .xml file.
This is particularly useful if you use different hardware controllers, or if your
controller has a limited set of knobs and faders and you want to focus on different
parameters of the Knifonium in different scenarios.
In addition to saving a mapping as a file, they are always saved within a preset.
1
2
3
To Next Page