6
Knifonium
Plugin Manual
1
FM Mod
Switches frequency modulation (FM) on or off. If engaged, the sine output of
VCO 2 (Master) modulates the pitch of VCO 1 (Slave). The amount of modulation
can be set via the FM Level parameter.
2
FM Level
Sets the amount of frequency modulation (FM). VCO 1 pitch is always modulated
by the sine output of VCO 2 independent of the selected VCO 2
waveform and VCO 2‘s level in the mixer section.
This only has an effect if FM Mod is engaged.
21
To Next Page