BrakeBuddy STEALTH 39530 - User Manual

The MOST Versatile and Easiest To Use Towed Vehicle Braking System available!™
Hopkins Manufacturing Corporation | 428 Peyton St. Emporia, KS 66801 | www.BrakeBuddy.com
39530
WARNING
Read all instructions before installing or operating the Stealth.
Failure to understand how to install or operate Stealth could result in property damage, personal injury or even death.
STEALTH
™
INSTALLATION mANuAL
NEED HELP? CALL - 1-800-470-2287

Summary

STEP 1: IDENTIFY ALL COMPONENTS AND TOOLS NEEDED

Components

Lists all main components for the braking system installation.

Tools Needed

Lists all necessary tools required for the installation process.

Main Unit (A)

Details the components of the main unit.

Pulley System (B)

Details the components of the pulley system.

All-in-One Adapter (C)

Details the components of the all-in-one adapter.

Vacuum Pump (D)

Details the components of the vacuum pump.

Dual Controller (E)

Details the components of the dual controller.

STEP 2: POSITION MAIN UNIT (A)

STEP 3: MOUNTING LOCATION FOR PULLEY AND BRAKE PEDAL CLAMP (B)

STEP 4: MOUNT PULLEY TO FLOOR BEHIND BRAKE PEDAL (B)

STEP 5: CUT CABLE TO LENGTH ON MAIN UNIT (A)

STEP 6: ROUTE AND INSTALL CABLE THROUGH PULLEY SYSTEM (B)

STEP 7: INSTALL ALL-IN-ONE ADAPTER ON THE TOWED VEHICLE (C)

STEP 8: RUN WIRES FROM BREAK-AWAY HARNESS TO MAIN UNIT (C)

STEP 9: RUN WIRES FROM BREAK-AWAY HARNESS TO BATTERY (C)

STEP 10: CONNECT TOWED VEHICLE WIRING KIT TO 4-FLAT FROM BREAK-AWAY HARNESS (OPTIONAL)

STEP 11: INSTALL VACUUM PUMP (D)

STEP 12: INSTALL DUAL CONTROLLER IN MOTORHOME (E)

BrakeBuddy STEALTH 39530 Specifications