BRASS MONKEY GH2038 - Product Dimensions; Operation; How to Turn on the Fridge

6
PRODUCT DIMENSIONS
OPERATION
How to Turn on the Fridge
1. Connect to power
2. Press to switch ON, long press for three seconds to switch OFF.
3. The internal temperature will display and the compressor will start
4. SET: Press button to enter dierent modes, ECO (Energy Saving Mode), and MAX
(Fast Cooling Mode). Factory setting is Max
5. When the power is on and the dual temperature zone is set to valid, press the “+” or
“-” button to enter the left zone temperature setting, and then press the button
to switch the left or right box temperature setting. Press “+” or “-” to adjust the
temperature.
6. In the power on state, long press the buttons “+” button and for 3 seconds to turn
the left zone on or o, note: the setting temperature of the left compartment must
not be lower than that of the right compartment and the right compartment cannot
be turned o separately.