9
This appliance is designed for household use only.
Description
1 Foil & Cutter cassette
2 On/off button
3 Charge indicator
4 Shaver power socket
5 Special cord set (design may differ)
6 Protection cap
For electric specifications, see printing on the special cord set.
Charging
Recommended ambient temperature for charging is 41 °F to 95 °F / 5 °C to
35 °C. The battery may not charge properly or at all under extreme low or
high temperatures. Recommended ambient temperature for shaving is 60 °F
to 95 °F / 15 °C to 35 °C. Do not expose the shaver to temperatures higher
than 122 °F / 50 °C for extended periods of time.
• Using the special cord set (5), connect the shaver to an electrical outlet
with the motor switched off. When charging for the first time or when the
shaver is not used for a few months, leave the shaver to charge
continuously for 4 hours.
• Once the shaver is completely charged, discharge the shaver through
normal use. Then recharge to full capacity. Subsequent charges will take
about 1 hour.
• A full charge provides up to 20 minutes of cordless shaving time
depending on your beard growth. However, the maximum battery
capacity will only be reached after several charging/discharging cycles.
• 5-minute quick charge is sufficient for a shave.
• Models 301s/300s only: You can also shave by connecting the shaver to
an electrical outlet via the special cord set.
Charge indicator (3)
The charge indicator shows the battery status.
• Charging: slow flashing
• Low battery: fast flashing
• Fully charged / during operation: continuously lighting up
Shaving
Press the on/off button (2) to operate the shaver.
The flexible shaving foils automatically adjust to every contour of your face.
90766916_Harmonia_3_S06-S36.indd 990766916_Harmonia_3_S06-S36.indd 9 31.03.16 10:4631.03.16 10:46
CSS APPROVED Effective Date 5Apr2016 GMT - Printed 30Jun2016 Page 8 of 35
To Next Page
Loading...
