6
1 Description
1 Foil protection cap
2 Shaver foil
2a InterFace trimmer
3 Cutter block
4 Release buttons
5 Pop-out long hair trimmer
6 Switch
7 Shaver Socket
Technical specifications
• Wattage: 3 W
• Voltage range: 100–240 V ~ / 50 or 60 Hz
(automatic adaptation)
2 Shaving
Switch positions
off
foil shave = Shaver foil only (for difficult to reach areas, e.g. under
the nose).
combi shave = Combination shave (InterFace trimmer works in tandem
with the shaver foil to first cut the longer problem hairs,
which then allows the foil to shave the shorter hairs even
closer) (b).
trimmer = The long hair trimmer is activated (for trimming
sideburns, moustache and beard) (c).
Tips for the perfect shave
• It can take up to 14-21 days for your beard to adjust to the new
shaving system.
• Shave before washing your face or taking a shower, as skin tends to
swell after washing.
• The drier the skin, the closer the shaving results will be.
• Hold the shaver at right angles (90°) to the skin. Stretch your skin and
shave against the direction of beard growth.
• To maintain 100% shaving performance replace your foil and
cutterblock every 18 month or when worn.
5449300_3105_NA Seite 6 Dienstag, 18. Oktober 2005 8:54 08
To Next Page
Loading...
