43
7 Shaver-to-station contacts
8 Release button for precision trimmer
9 Shaver power socket
10 Power supply**
10a Charging stand*/**
11 Travel case
* not with all models (see display box)
** design can differ
For electric specifications, see printing on the power supply.
Basic operating information
•
A full charge takes 1 hour and provides up to 60 minutes of
cordless shaving time. This may vary depending on your
beard growth and ambient temperature.
• Recommended ambient temperature for charging is 5 °C to
35 °C, for storage and shaving it is 15 °C to 35 °C. The
battery may not charge properly or at all under extremely low
or high temperatures.
• Do not expose the appliance to temperatures higher than
50 °C for extended periods of time.
• When the shaver is connected to an electrical outlet, it may
take some minutes until the display illuminates.
Charging
•
Connect the shaver to an electrical outlet by snapping the
power supply (10) into the power socket of the shaver (9) /
the charging stand (10a). For cc models plug into the station
power socket (see chapter «Clean & Charge Station»).
• For first-time charge, charge continuously for at least 1 hour.
• The actual charge status is shown on the display.
90933746_83XX_W&D_CC&SOLO_CN-KR-ANZ.indd 4390933746_83XX_W&D_CC&SOLO_CN-KR-ANZ.indd 43 04.09.19 10:2104.09.19 10:21
Page 46 of 63
P&G RELEASE 09/04/2019 08:55:36 AM Printed 2019-09-04
To Next Page
Loading...
