Why does my Braun Electric Shaver battery die so fast?
If you notice that the battery performance of your Braun Electric Shaver has dropped significantly, it may be because the foil and cutter are worn, which requires more power for each shave. Renew the Foil & Cutter cassette. Also, if you regularly clean the shaver head with water but don't lubricate it, apply a drop of light machine oil on top of the foil once a week for lubrication.
What to do if my Braun 8365 CC Electric Shaver won't charge?
If your Braun Electric Shaver isn't charging, wait a few minutes as charging will start automatically. The recommended ambient temperature for charging is 41 °F to 95 °F / 5 °C to 35 °C. Make sure the power supply needs to snap in and that the contacts of the shaver need to align with contacts in the Clean & Charge Station.
What to do if Braun 8365 CC does not start?
If your Braun Electric Shaver does not start, unplug the shaver and press the on / off button for 3 seconds to unlock the shaver.
Why is my Braun Electric Shaver head damp?
A damp shaver head on your Braun Electric Shaver could be because the drying time after automatic cleaning was too short. Clean directly after shaving to allow enough time for drying. It may also be because the drain of the Clean & Charge station is clogged, so clean the drain with a wooden toothpick.
Why does my Braun 8365 CC Electric Shaver not fully charge?
If your Braun Electric Shaver does not charge completely and keeps blinking, the ambient temperature is out of valid range. The recommended ambient temperature for charging is 41 °F to 95 °F / 5 °C to 35 °C.
Why does my Braun 8365 CC Electric Shaver smell bad?
An unpleasant smell from your Braun Electric Shaver can occur if the shaver head is cleaned with water. When cleaning the shaver head with water only use hot water and from time to time some liquid soap (without abrasive substances). Remove Foil & Cutter cassette to let it dry. Also, the cleaning cartridge should be changed at least every 8 weeks.
What to do if my Braun 8365 CC's cleaning doesn't start?
If cleaning doesn't start on your Braun Electric Shaver, make sure the shaver is properly placed in the Clean & Charge Station, pushing it to the rear so that the contacts align. Also, ensure the cleaning cartridge has sufficient cleaning fluid. If the display blinks red, insert a new cleaning cartridge and press the start button again. Finally, if the appliance is in stand-by mode, press the start button again.
Why is my Braun Electric Shaver's shaving performance so bad?
A drop in shaving performance for your Braun Electric Shaver is usually because the foil and cutter are worn, so renew the Foil & Cutter cassette. Another reason could be that the shaving system is clogged. Soak the Foil & Cutter cassette into hot water with a drop of dish liquid. Afterwards rinse it properly and tap it out. Once dry apply a drop of light machine oil on the foil.
Why is my Braun 8365 CC Electric Shaver consuming so much cleaning fluid?
Increased consumption of cleaning fluid in your Braun Electric Shaver's Clean & Charge station is caused by the drain of the Clean & Charge station being clogged. Clean the drain with a wooden toothpick.
Details risks of electric shock and essential precautions to avoid injury.
Lists risks of burns, fire, injury, and provides guidelines for safe product operation.
Instructions on connecting the shaver to an electrical outlet for charging.
General| Brand | Braun |
|---|---|
| Model | 8365 CC |
| Category | Electric Shaver |
| Language | English |
To Next Page
