To Next PageTo Next PageWhy has my Braun 83XXcc battery performance dropped?
If the battery performance of your Braun Electric Shaver has significantly dropped, it could be because the foil and cutter are worn, requiring more power for each shave; renew the Foil & Cutter cassette. Also, if you regularly clean the shaver head with water but don't lubricate it, apply a drop of light machine oil on top of the foil once a week for lubrication.
What to do if my Braun 83XXcc charging does not start?
If your Braun Electric Shaver isn't charging, there might be a few reasons. Sometimes, charging can be delayed, especially after long storage – wait a few minutes, and it should start automatically. Make sure the ambient temperature is between 5 °C and 35 °C for optimal charging. Also, ensure the power supply is properly plugged into the shaver, it needs to snap in correctly.
Why does my Braun 83XXcc not start?
Your Braun Electric Shaver might not start for a couple of reasons. First, it can only be operated cordless, so unplug it. Second, the travel lock might be activated. To unlock it, press the on/off button for 3 seconds.
What to do if my Braun Electric Shaver does not charge completely?
If your Braun Electric Shaver isn't charging fully and keeps blinking, the ambient temperature might be out of the recommended range. Ensure the temperature is between 5 °C and 35 °C for optimal charging.
Why my Braun 83XXcc does not charge completely?
If your Braun Electric Shaver does not charge completely and keeps blinking, the ambient temperature may be out of the recommended range. The recommended ambient temperature for charging is 41 °F to 95 °F / 5 °C to 35 °C.
How to prevent increased consumption of cleaning fluid for my Braun 83XXcc?
To address increased cleaning fluid consumption in your Braun Electric Shaver, regularly wipe the tub clean.
What to do if cleaning does not start on my Braun 83XXcc?
If cleaning doesn't start on your Braun Electric Shaver when pressing the start button, ensure the shaver is correctly placed in the Clean & Charge Station, pushed to the rear so the contacts align. If the cleaning cartridge doesn't contain enough cleaning fluid and the display blinks red, insert a new cartridge and press the start button again. If the appliance is in stand-by mode, press the start button again.
Why is the shaver head of my Braun 83XXcc damp?
If your Braun Electric Shaver head is damp, it may be because the drying time after automatic cleaning was too short; clean directly after shaving to allow enough drying time. Alternatively, the drain of the Clean & Charge station might be clogged; clean the drain with a wooden toothpick.
Why is my Braun 83XXcc head damp?
A damp shaver head on your Braun Electric Shaver can occur because: 1. The drying time after automatic cleaning was too short. Clean directly after shaving to allow enough drying time. 2. The drain of the Clean & Charge station is clogged. You should clean the drain with a wooden toothpick.
Why does my Braun Electric Shaver head smell bad?
An unpleasant smell from your Braun Electric Shaver head may be due to: 1. Cleaning the shaver head with water improperly. Use only hot water and occasionally a bit of liquid soap (without abrasive substances). Remember to remove the Foil & Cutter cassette and let it dry. 2. Using the cleaning cartridge for too long. Replace the cleaning cartridge at least every 8 weeks.
General| Type | Electric Shaver |
|---|---|
| Model | 83XXcc |
| Series | Series 8 |
| Shaver Type | Foil Shaver |
| Cleaning System | Yes |
| Cleaning Station | Yes |
| Wet & Dry Use | Yes |
| Power Source | Battery |
| Battery Type | Li-ion |
| Charge Time | 1 hour |
| Precision Trimmer | Yes |
| Travel Lock | Yes |
| Waterproof | Yes |
| Run Time | 50 minutes |
| Quick Charge | 5 minutes |
| Display | LED |
