To Next PageTo Next PageWhy is my Braun 83XXcc Electric Shaver using so much cleaning fluid?
Increased consumption of cleaning fluid in your Braun Electric Shaver's Clean & Charge station could be due to a clogged drain. Clean the drain with a wooden toothpick and regularly wipe the tub clean.
Why does my Braun Electric Shaver head smell bad?
An unpleasant smell from your Braun Electric Shaver head may be due to: 1. Cleaning the shaver head with water improperly. Use only hot water and occasionally a bit of liquid soap (without abrasive substances). Remember to remove the Foil & Cutter cassette and let it dry. 2. Using the cleaning cartridge for too long. Replace the cleaning cartridge at least every 8 weeks.
What to do if cleaning doesn't start on my Braun Electric Shaver?
If the cleaning cycle isn't starting on your Braun Electric Shaver, check these: 1. Ensure the shaver is correctly placed in the Clean & Charge Station, pushed to the rear so the contacts align. 2. Make sure the cleaning cartridge has enough cleaning fluid (if the display blinks red, it needs replacing). Insert a new cartridge and press the start button again. 3. The appliance might be in stand-by mode. Press the start button again to initiate cleaning.
What to do if my Braun 83XXcc does not start?
If your Braun Electric Shaver does not start, unplug the shaver. Also, try pressing the on/off button for 3 seconds to unlock it.
What to do if Braun 83XXcc Electric Shaver does not start?
If your Braun Electric Shaver does not start, unplug the shaver and press the on / off button for 3 seconds to unlock the shaver.
What to do if my Braun Electric Shaver won't charge?
If your Braun Electric Shaver isn't charging, wait a few minutes as charging will start automatically. The recommended ambient temperature for charging is 41 °F to 95 °F / 5 °C to 35 °C. Make sure the power supply needs to snap in and that the contacts of the shaver need to align with contacts in the Clean & Charge Station.
Why does my Braun 83XXcc battery die so fast?
If you notice that the battery performance of your Braun Electric Shaver has dropped significantly, it may be because the foil and cutter are worn, which requires more power for each shave. Renew the Foil & Cutter cassette. Also, if you regularly clean the shaver head with water but don't lubricate it, apply a drop of light machine oil on top of the foil once a week for lubrication.
What to do if my Braun Electric Shaver does not charge completely?
If your Braun Electric Shaver isn't charging fully and keeps blinking, the ambient temperature might be out of the recommended range. Ensure the temperature is between 5 °C and 35 °C for optimal charging.
Why does my Braun 83XXcc not start?
Your Braun Electric Shaver might not start for a couple of reasons. First, it can only be operated cordless, so unplug it. Second, the travel lock might be activated. To unlock it, press the on/off button for 3 seconds.
What to do if my Braun 83XXcc charging does not start?
If your Braun Electric Shaver isn't charging, there might be a few reasons. Sometimes, charging can be delayed, especially after long storage – wait a few minutes, and it should start automatically. Make sure the ambient temperature is between 5 °C and 35 °C for optimal charging. Also, ensure the power supply is properly plugged into the shaver, it needs to snap in correctly.
General| Type | Electric Shaver |
|---|---|
| Model | 83XXcc |
| Series | Series 8 |
| Shaver Type | Foil Shaver |
| Cleaning System | Yes |
| Cleaning Station | Yes |
| Wet & Dry Use | Yes |
| Power Source | Battery |
| Battery Type | Li-ion |
| Charge Time | 1 hour |
| Precision Trimmer | Yes |
| Travel Lock | Yes |
| Waterproof | Yes |
| Run Time | 50 minutes |
| Quick Charge | 5 minutes |
| Display | LED |
