Braun 83 cc Series User Manual (English)

Questions and Answers:

G
Gregory AdamsSep 13, 2025
What to do if my Braun Electric Shaver shaving performance dropped significantly?
- B
  bauerlindaSep 13, 2025
  If you notice a significant drop in shaving performance with your Braun Electric Shaver, it could be due to worn foil and cutter. Consider renewing the Foil & Cutter cassette. Another possible cause is a clogged shaving system. To resolve this, soak the Foil & Cutter cassette in hot water with a drop of dish liquid, then rinse it thoroughly, tap it out, and apply a drop of light machine oil once it's dry.
G
Gabrielle BlairSep 13, 2025
Why does my Braun 83 cc have an unpleasant smell?
- M
  Matthew Grant DDSSep 14, 2025
  An unpleasant smell from your Braun Electric Shaver head can occur if the shaver head is cleaned with water. When cleaning the shaver head with water only use hot water and from time to time some liquid soap (without abrasive substances). Remove Foil & Cutter cassette to let it dry. Also, if the cleaning cartridge is in use for more than 8 weeks, change the cleaning cartridge at least every 8 weeks.
A
April WhiteSep 14, 2025
What to do if my Braun 83 cc cleaning does not start when pressing the start button?
- J
  John GonzalezSep 14, 2025
  If the cleaning cycle doesn't start when you press the start button on your Braun Electric Shaver's Clean & Charge Station, make sure the shaver is correctly placed in the station, pushed to the rear so that the contacts align. If the cleaning cartridge does not contain sufficient cleaning fluid (display blinks red), insert a new cleaning cartridge and press the start button again. Also, ensure that the appliance is not in stand-by mode, and if so, press the start button again.
K
Katherine RobersonAug 29, 2025
Why is my Braun 83 cc not charging?
- M
  Mr. Anthony Brown DDSAug 29, 2025
  If your Braun Electric Shaver isn't charging when connected to the power socket or placed in the Clean & Charge Station, several factors could be the reason: * Sometimes charging is delayed, especially after long storage, wait a few minutes, and charging will start automatically. * Ensure the ambient temperature is between 5 °C and 35 °C for optimal charging. * Make sure the power supply is correctly plugged into the shaver and that the shaver's contacts align properly with those in the Clean & Charge Station.
H
Heidi MendozaAug 25, 2025
Why is my Braun 83 cc shaving performance dropped significantly?
- A
  April WarrenAug 25, 2025
  If the shaving performance of your Braun Electric Shaver has significantly declined: * The foil and cutter may be worn. If so, renew the Foil & Cutter cassette. * The shaving system could be clogged. To resolve this, soak the Foil & Cutter cassette in hot water with a drop of dish liquid, then rinse it thoroughly, tap it out, and once dry, apply a drop of light machine oil to the foil.
V
vholtAug 25, 2025
What to do if cleaning does not start on Braun 83 cc Electric Shaver?
- J
  Julie WongAug 26, 2025
  If cleaning doesn't start when you press the start button on your Braun Electric Shaver, check the following: * Ensure the shaver is properly placed in the Clean & Charge Station, pushed to the rear so that the contacts align. * Verify the cleaning cartridge contains sufficient cleaning fluid. If the display blinks red, insert a new cleaning cartridge and press the start button again. * The appliance might be in stand-by mode. Press the start button again to initiate cleaning.
L
Lisa SchmidtAug 26, 2025
Why does my Braun 83 cc Electric Shaver battery performance dropped significantly?
- T
  tiffany80Aug 26, 2025
  If you notice a significant drop in battery performance of your Braun Electric Shaver, there are a couple of potential reasons: * The foil and cutter may be worn, requiring more power for each shave. Renew the Foil & Cutter cassette. * If you regularly clean the shaver head with water but don't lubricate it, apply a drop of light machine oil on top of the foil once a week for lubrication.
E
Erica JohnsonAug 26, 2025
What to do if my Braun 83 cc does not start?
- B
  bthomasAug 26, 2025
  If your Braun Electric Shaver does not start when you press the on/off button, it might be for one of two reasons: first, the shaver can only be operated cordless, and second, the travel lock might be activated. To solve this, unplug the shaver and press the on/off button for 5 seconds to unlock the shaver.
D
Denise ReyesAug 27, 2025
What to do if my Braun 83 cc is not charging?
- S
  steven92Aug 27, 2025
  If your Braun Electric Shaver isn't charging when connected to a power socket, it might be due to a few reasons: sometimes charging is delayed, especially after long storage; the ambient temperature might be outside the valid range; or the power supply isn't properly plugged in. Wait a few minutes to see if charging starts automatically. Ensure the ambient temperature is between 5 °C and 35 °C. Make sure the power supply snaps in correctly.
N
Natalie FloresAug 27, 2025
Why is my Braun 83 cc battery performance dropped significantly?
- M
  Michael KellyAug 27, 2025
  A significant drop in battery performance of your Braun Electric Shaver can occur if the foil and cutter are worn, requiring more power for each shave. Renewing the Foil & Cutter cassette can resolve this issue. Also, regularly cleaning the shaver head with water but not lubricating it can cause this problem. If you clean the shaver with water, apply a drop of light machine oil on top of the foil once a week for lubrication.