Braun 9250cc - Page 36

36
Shaver turns off
with fully
charged battery.
Foil and cutter are worn
which requires more
power than the motor
can deliver.
The appliance turns off.
– Replace Foil & Cutter cassette.
– Regularly oil the shaving system,
especially when cleaning with water
only.
Shaver head is
damp.
1. Drain of the
Clean&Charge Station
is clogged.
2. Cleaning cartridge has
been used for quite
a while.
1. Clean the drain with a wooden
toothpick.
2. The alcohol/isopropanol proportion
has decreased while the oil
proportion has increased. Remove
residue with a cloth.
CLEAN&CHARGE STATION
Cleaning does
not start when
pressing the
start button.
1. Shaver is not placed
properly in the
Clean&Charge Station.
2. Cleaning cartridge
does not contain
enough cleaning fluid
(level indicator blinks
red).
3. Appliance is in stand-by
mode.
1. Insert shaver into the Clean&Charge
Station (contacts of the shaver need
to align with contacts in the station).
2. Insert new cleaning cartridge.
3. Press start button again.
Increased
consumption of
cleaning fluid.
Drain of the
Clean&Charge Station
is clogged.
– Clean the drain with a wooden
toothpick.
– Regularly wipe the tub clean.
90778960_Series_9_9250cc_Japan.indd 3690778960_Series_9_9250cc_Japan.indd 36 10.02.16 13:3110.02.16 13:31
CSS APPROVED Effective Date 23Mar2016 GMT - Printed 30Jun2016 Page 36 of 40