Braun BD 5006 - Technical specifications

14
 Labels and Symbols
The device is marked with the following symbols:
Type BF Applied Part
Class II equipment
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Follow instructions for use
WEEE waste disposal mark of the European Union
Conformity mark of the European Union
Keep Dry
Direct current Connection polarity
6027...
Only use with Power Supply 6027
MET
usC
NRTL Certification marking
 Technical specifications
Braun Silk·expert is a filtered broadband Intense Pulsed Light system with the following technical
specifications:
Repetition rate: manually pulsed every 1-2 seconds (depending on treatment setting),
continuous operation
Max optical output: 6 J/cm
2
Pulse length 2.6 msec FWHM
Power line input: 00 - 240V~, 50/60Hz, 1.3 - 0.55A
Operating temperature: 5°C - 40°C / 41°F - 104°F
Optimum operating temperature: 5°C - 30°C / 59°F - 86°F
91603867_BD_5006_5007_US_S4-18.indd 1491603867_BD_5006_5007_US_S4-18.indd 14 06.10.17 12:0206.10.17 12:02
CSS APPROVED Effective Date 20Oct2017 GMT - Printed 21Nov2017 Page 14 of 18