10
What to do if ...
Problem Reason Solution
Batteries are low.
Measurements still possible.
With rechargeable batteries,
the «battery low» symbol
may appear earlier than with
alkaline batteries.
Battery replacement required soon.
(flashing)
Batteries are flat. Memory
readings can be called up.
Measurements are not
possible.
Insert new batteries.
Cuff is too loose or
cannot be inflated.
Refit cuff tightly, repeat measurement
as shown and described under
«Measuring».
e.g.
Error message higher
than 64:
Cuff is not properly fitted.
Refit cuff tightly, repeat measurement
as shown and described under
«Measuring».
e.g.
Error message lower than
64:
System error
Have the product checked at a
Braun Service Centre.
Measurement or
inflation does not
start instantly.
Right measurement
position was not reached.
Repeat measurement as shown
and described under «Measuring»
or deactivate the position sensor.
6064013_BP2510_S.5-52 Seite 10 Mittwoch, 5. Februar 2003 12:07 12
To Next Page
Loading...
Need help?
General
