8
Please note:
15 seconds after switching on the appliance, the measuring
process will start automatically, even if the appropriate
measuring position has not been reached.
If at any time, you want to discontinue the measurement,
press the I/0 button.
Turning off the product
Press the I/0 button (C) to turn the product off. Otherwise the
product will turn off automatically after 2 minutes.
Memory function
Your blood pressure monitor stores the readings of the last
30 measurements. Storing is done automatically without
having to press the memory button after a measurement.
The memory cannot be cleared. Once the memory is full,
the oldest values will be overwritten.
Recalling stored readings
To recall stored readings, first turn the product off, then press
the memory button («mem») (B).
The latest reading will be displayed. The number in the upper
left corner of the display indicates the memory position
(0 being the oldest, 29 the most recent).
Repeatedly pressing the memory button will call up one by
one all stored readings.
I/O
6064013_BP2510_S.5-52 Seite 8 Mittwoch, 5. Februar 2003 12:07 12
To Next Page
Loading...
Need help?
General
