Why my Braun Blender does not turn on?
If your Braun Blender isn't turning on, first ensure it's properly plugged into a working power outlet. Then, check the fuse or circuit breaker in your home to see if it has tripped. If the issue persists after checking these, contact Braun Service.
Why my Braun Blender does not operate?
If your Braun Blender isn't working, first, ensure it's properly plugged into a power outlet. Next, check the fuse or circuit breaker in your home to see if it has tripped. If neither of these steps resolves the issue, contact Braun Service.
What to do if safety button light is red and imode selector lights are flashing on Braun Blender?
If the safety button light is solid red and the imode selector lights are flashing on your Braun Blender, it indicates that the device is overheated. Allow the device to cool down for one hour. It will be ready for use again when the imode selector light stops flashing and the safety button light flashes.
What to do if there is water in the lid with Gearbox of Braun Blender?
If water has entered the lid with Gearbox of your Braun Blender because it was accidentally immersed or placed in the dishwasher, remove the rubber plug inside the coupling for the motor part and drain the water. Then, replace the plug. Be aware that water in the lid can damage the device, so this method should not be used intentionally to wash the lid in the dishwasher.
What to do if my Braun Blender is hot and does not operate?
If your Braun Blender overheats and stops working, it's likely that the overheat protection has been activated. To resolve this, allow the device to cool down for one hour. After this cooling period, the blender should be operational again.
General| Brand | Braun |
|---|---|
| Model | MultiQuick 9 MQ 9087X |
| Category | Kitchen Appliances |
| Language | English |
To Next Page