To Next PageTo Next PageWhy my Braun Blender does not turn on?
If your Braun Blender isn't turning on, first ensure it's properly plugged into a working power outlet. Then, check the fuse or circuit breaker in your home to see if it has tripped. If the issue persists after checking these, contact Braun Service.
Why my Braun Blender does not operate?
If your Braun Blender isn't working, first, ensure it's properly plugged into a power outlet. Next, check the fuse or circuit breaker in your home to see if it has tripped. If neither of these steps resolves the issue, contact Braun Service.
What to do if safety button light is red and imode selector lights are flashing on Braun Blender?
If the safety button light is solid red and the imode selector lights are flashing on your Braun Blender, it indicates that the device is overheated. Allow the device to cool down for one hour. It will be ready for use again when the imode selector light stops flashing and the safety button light flashes.
What to do if there is water in the lid with Gearbox of Braun Blender?
If water has entered the lid with Gearbox of your Braun Blender because it was accidentally immersed or placed in the dishwasher, remove the rubber plug inside the coupling for the motor part and drain the water. Then, replace the plug. Be aware that water in the lid can damage the device, so this method should not be used intentionally to wash the lid in the dishwasher.
What to do if my Braun Blender is hot and does not operate?
If your Braun Blender overheats and stops working, it's likely that the overheat protection has been activated. To resolve this, allow the device to cool down for one hour. After this cooling period, the blender should be operational again.
General| Type | Immersion blender |
|---|---|
| Product color | Black, Stainless steel |
| Removable bowl | Yes |
| Power source | - |
| Bowl capacity | - L |
| Chopper bowl capacity | 0.35 L |
| Doesn't contain | Bisphenol A (BPA) |
| Blade material | Stainless steel |
| Package depth | 220 mm |
| Package width | 264 mm |
| Package height | 272 mm |
| Package weight | 1990 g |
| Quantity per pallet | 96 pc(s) |
| Master (outer) case width | 282 mm |
| Master (outer) case height | 458 mm |
| Master (outer) case length | 538 mm |
| Master (outer) case weight | 8570 g |
| Quantity per master (outer) case | 4 pc(s) |
Weight and Dimensions| Depth | 68 mm |
|---|---|
| Height | 410 mm |
| Weight | 1000 g |
Handle sharp blades with care during removal, insertion, and cleaning.
Do not immerse motor part, cord, or plug in water or other liquids.
Inspect cord/plug for damage; avoid operating if damaged.
Control speed and results with one-handed Smartspeed switch operation.
Use imode selector & safety button to start; choose from 3 modes.
Check power connection, fuse/circuit breaker. Contact Braun Service if unresolved.
Let device cool down for one hour; lights indicate readiness.
