Why is my Braun PurEase FP 3131 blender or mill not working?
The blender or mill might not operate if it's not correctly locked on or assembled. Make sure the blender or mill is correctly fitted to the interlock and that the blade assembly is fully tightened into the goblet/jar.
Why my Braun Blender or mill will not operate?
If your Braun Blender or mill won't operate, it might not be locked on correctly or assembled properly. Ensure the blender or mill is correctly fitted to the interlock. Also, verify that the blade assembly is fully tightened into the goblet or jar.
What to do if my Braun PurEase FP 3131 will not operate?
If your Braun Food Processor won't operate, first, ensure it's properly plugged in. Then, check that the feed tube and bowl handle are situated on the right-hand side. Also, verify that the lid interlock is correctly located in the handle area. The processor won't work if the bowl and lid aren't fitted correctly.
Why does my Braun PurEase FP 3131 stop during processing?
Your Braun Food Processor might stop during processing because it's overloaded, you've exceeded the maximum capacity, or the lid isn't locked correctly. Refer to the recommended usage chart to check maximum capacities. Ensure the lid is securely locked.
How to fix a Braun PurEase FP 3131 blender or mini chopper/mill leaking?
If your Braun Food Processor's blender, mini chopper, or mill is leaking from the blade assembly base, it could be due to a missing, incorrectly fitted, or damaged seal. Check that the seal is correctly fitted and not damaged.
What to do if my Braun Blender processor stops during processing?
If your Braun Blender processor stops during processing, it might be overloaded, exceeding its maximum capacity, or the lid may not be locked correctly. Refer to the usage chart to ensure you are not exceeding the maximum capacities. Also, check that the lid is securely locked.
How to fix a Braun Blender when the processor will not operate?
If the processor of your Braun Blender won't operate, it could be due to several reasons: there's no power, the bowl isn't correctly fitted to the power unit, or the bowl lid isn't properly locked. First, ensure the processor is plugged in. Then, check that the feed tube and bowl handle are on the right-hand side. Also, verify that the lid interlock is correctly located in the handle area. Remember, the processor won't function if the bowl and lid are incorrectly fitted.
What to do if my Braun Blender is leaking?
If your Braun Blender, mini chopper, or mill is leaking from the blade assembly base, it could be due to a missing, incorrectly fitted, or damaged seal. Check the seal to ensure it is correctly fitted and undamaged. If you need a replacement seal, refer to ‘service and customer care’.
General| Number of Speed Settings | 2 |
|---|---|
| Pulse Function | Yes |
| Material | Plastic |
| Dishwasher Safe Parts | Yes |
| Type | Food Processor |
| Color | White |
To Next Page