English
Important
1 When the foil frame is removed, do not turn on the shaver.
Shaving Conditioner would leak.
2 Inserting the cartridge
a) Disconnect the power supply cord from the shaver.
b) Open latch and pull away cover.
c) If necessary, remove old cartridge by its pull-out tag.
d) Remove sealing foil from new cartridge.
e) Insert cartridge as shown, push firmly.
f) Put cover in place and close latch.
3 Changing the applicator
a) Remove the foil frame.
b) Lift old applicator at the notch on one side, then the other.
c) Remove old applicator and dispose.
d) Place new applicator on the foil frame, leaving a small gap.
e) With both thumbs push applicator right and left until it clicks
into place.
f) Replace foil frame, ensuring both sides click audibly into
place.
Shaving Conditioner
Highly flammable. Keep locked up. Keep out of the reach of
children. Keep away from sources of ignition – no smoking.
In case of accident or if you feel unwell, seek medical advice
immediately (show the label where possible).
5337017_Conditioner.fm Seite 3 Donnerstag, 6. Februar 2003 2:05 14
To Next Page
Loading...
