Braun TexStyle 5 SI 51 Series User Manual (English)

Questions and Answers:

N
Natasha NelsonJul 25, 2025
Why is my Braun Iron producing little or no steam?
- C
  Cassandra KeithJul 25, 2025
  If your Braun Iron isn't producing steam, there are a few things you can check: * Ensure the water tank has enough water and refill if necessary. * Make sure the temperature selector is set to at least the "••" setting. * Allow the iron to heat up fully until the temperature control LED remains constantly ON. * Verify that the steam selector is set to a steam setting. * It may be necessary to perform the descaling procedure.
P
Phyllis RiveraJul 30, 2025
Why does my Braun Iron drip water while ironing?
- D
  Danny McneilJul 30, 2025
  If you notice water droplets dripping from your Braun Iron onto the fabric while ironing, here's what you can do: * Ensure the water tank lid is securely closed by pressing on it. * Make sure the temperature selector is set to at least "••" or select a higher temperature. * Use longer intervals when pressing the steam shot button. * If you've added chemicals to the water tank, empty it and rinse it thoroughly 2-3 times.
L
lisa29Aug 5, 2025
What to do if Braun TexStyle 5 SI 51 soleplate is not heating up?
- J
  Joseph Quinn DDSAug 5, 2025
  If the soleplate of your Braun Iron is not heating up, try these steps: Unplug the iron and then plug it back in. Rotate the temperature selector from «min» to «max» and then select the desired temperature.
M
mgonzalezAug 9, 2025
What to do if flakes come out of my Braun TexStyle 5 SI 51?
- H
  Holly GlennAug 10, 2025
  If you're experiencing flakes and white impurities coming out of the soleplate of your Braun Iron during ironing, this usually indicates a buildup of mineral deposits. To resolve this, perform the descaling procedure.
C
Carrie StewartAug 14, 2025
How to fix the spray function on a Braun TexStyle 5 SI 51?
- S
  Stephanie MitchellAug 15, 2025
  If the spray function or steam shot on your Braun Iron isn't working correctly, the first thing to check is the water tank. Refill the water tank.
B
Briana JacksonAug 19, 2025
How to stop Braun TexStyle 5 SI 51 from leaking after use?
- K
  Katherine VaughnAug 20, 2025
  If water droplets drip from the soleplate of your Braun Iron after it has been unplugged or stored, try the following: * Set the steam regulator to « ». * Empty the water tank after ironing. * Place the iron vertically on a stable surface while it cools down.

Braun TexStyle 5 SI 51 Series Specifications

General

Soleplate	Ceramic
Water tank capacity	300 ml
Type	Steam Iron
Vertical Steam	Yes
Anti-drip system	Yes
Calc clean system	Yes
Auto shut-off	Yes
Self-cleaning	Yes
Cord length	2 m