Braun TexStyle 5 SI 5184 User Manual (English)

Questions and Answers:

J
jennifercowanJul 26, 2025
Why is my Braun TexStyle 5 SI 5184 Iron producing little or no steam?
- A
  Alyssa CarterJul 26, 2025
  If your Braun Iron isn't producing steam, there are a few things you can check: * Ensure the water tank has enough water and refill if necessary. * Make sure the temperature selector is set to at least the "••" setting. * Allow the iron to heat up fully until the temperature control LED remains constantly ON. * Verify that the steam selector is set to a steam setting. * It may be necessary to perform the descaling procedure.
S
Shelby BlankenshipJul 30, 2025
Why does my Braun TexStyle 5 SI 5184 drip water while ironing?
- C
  Carmen ZamoraJul 30, 2025
  If you notice water droplets dripping from your Braun Iron onto the fabric while ironing, here's what you can do: * Ensure the water tank lid is securely closed by pressing on it. * Make sure the temperature selector is set to at least "••" or select a higher temperature. * Use longer intervals when pressing the steam shot button. * If you've added chemicals to the water tank, empty it and rinse it thoroughly 2-3 times.
K
Kelly BautistaAug 4, 2025
What to do if Braun TexStyle 5 SI 5184 soleplate is not heating up?
- M
  Michael JohnsonAug 4, 2025
  If the soleplate of your Braun Iron is not heating up, try these steps: Unplug the iron and then plug it back in. Rotate the temperature selector from «min» to «max» and then select the desired temperature.
M
Michael HannaAug 9, 2025
What to do if flakes come out of my Braun TexStyle 5 SI 5184 Iron?
- J
  joseph01Aug 9, 2025
  If you're experiencing flakes and white impurities coming out of the soleplate of your Braun Iron during ironing, this usually indicates a buildup of mineral deposits. To resolve this, perform the descaling procedure.
J
Jason BrennanAug 15, 2025
How to fix the spray function on a Braun TexStyle 5 SI 5184?
- K
  Kevin YoungAug 15, 2025
  If the spray function or steam shot on your Braun Iron isn't working correctly, the first thing to check is the water tank. Refill the water tank.
R
Robert ThomasAug 20, 2025
How to stop Braun Iron from leaking after use?
- A
  Angie RosalesAug 20, 2025
  If water droplets drip from the soleplate of your Braun Iron after it has been unplugged or stored, try the following: * Set the steam regulator to « ». * Empty the water tank after ironing. * Place the iron vertically on a stable surface while it cools down.

Braun TexStyle 5 SI 5184 Specifications

General

Type	Steam iron
Power	2400 W
Steam output	45 g/min
Water tank capacity	300 ml
Vertical steam	Yes
Anti-drip system	Yes
Calc clean	Yes
Auto shut-off	Yes
Self-cleaning function	Yes
Cord length	2 m