What to do if the Braun ThermoScan IRT 6520 Thermometer displays a system error?
If the Braun Thermometer displays a continuous flashing self-check and doesn't beep or show the ready symbol, allow it to turn off automatically (about 1 minute), then turn it back on. If the error continues, remove the batteries and reinsert them to reset the device. If the problem persists after these steps, further assistance is needed.
What to do if the Braun Thermometer says battery is too low?
If your Braun Thermometer indicates that the battery is too low for accurate temperature readings, replace the batteries with new ones.
Why does my Braun Thermometer show temperature out of range?
If your Braun Thermometer shows a temperature outside the typical human range (34 – 42.2 °C or 93.2 – 108 °F), ensure the probe tip and lens are clean, and a new, clean lens filter is attached. Also, confirm the thermometer is properly inserted. Then, take another measurement.
What to do if Braun ThermoScan IRT 6520 gives inaccurate measurement?
To resolve inaccurate measurements with your Braun Thermometer, replace the lens filter, reposition the thermometer, and press the Start button to begin a new measurement.
General| Measurement Method | Infrared |
|---|---|
| Display | LCD |
| Pre-warmed Tip | Yes |
| Age Precision Technology | Yes |
| Backlight | Yes |
| Type | Ear Thermometer |
| Fever Guidance | Yes |
| Measurement Site | Ear |
| Memory | 9 readings |
| Battery Type | 2 x AA |
| Measurement Range | 34.0 - 42.2 °C (93.2 - 108.0 °F) |
| Accuracy | ±0.2 °C (±0.4 °F) |
| Display Resolution | 0.1°C or 0.1°F |
| Battery Life | Approximately 1000 measurements |
| Age Range | All ages |
| Special Features | ExacTemp |
| Weight | Approximately 100g (without batteries) |
Lists major parts for both IRT 6520 and IRT 6030 models.
Advises seeking medical help for specific symptoms or high temperatures.
Covers ambient temperature, filter use, and hygiene for accuracy.
Covers household use, diagnosis limitations, modification, and symptoms.
Explains how the display indicates fever based on age.
Explains the infrared measurement principle and probe warming.
Details the advantage of ear temperature for core body temp.
Instructions for removing the case and turning on the device.
Explains the lens filter indicator and attachment process.
Describes using the AgeSmart™ button for age selection.
Details probe insertion, ExacTemp light, and confirmation signals.
Covers filter use, consistent ear selection, and ear canal cleanliness.
How to access and view stored temperature readings.
Description of the illuminated display feature.
Steps to switch between Celsius and Fahrenheit.
Guidance on cleaning the probe tip and device exterior.
Procedure for changing batteries when indicated.
Details on initial calibration and when to contact service.
Solutions for missing filter and incorrect probe placement.
Addresses out-of-range temperatures, system faults, and battery issues.
Details temperature ranges, accuracy, battery life, and service life.
Lists relevant safety and performance standards the device meets.
Lists factors like room temperature, hearing aids, pillow, and ear drops.
To Next Page
