10
responding user’s blood pressure data will not be deleted. The
delete operation must be conrmed by user.
Select mode
How to select user1/user2
• Make sure the product is in power o mode.
• Press the “user” button, and the current user mode will ash on
the LCD display.
• Press the “user” button again, it will change to another user
mode.
• When you have set the correct user mode, press the “power”
button to save the user mode and exit this setting.
• If you have selected the correct user mode and do not press a
button for 2 minutes, the product will shut o and save the user
mode you have selected automatically.
How to set date and time
• First turn o the product. Press the “set” button, and the
“month” will ash.
• Press the “adjust” button to change the current month.
(It can only be increased.)
• When the month is correct, press the “set” button again.
• Next the “date” will ash.
• Follow the same operation process to adjust the “date”, “hour”
and “minute”.
• When you nish the date/time setting, you can press the
“power” button to shut o the product or if you do not press a
button for 2 minutes, the product will shut o and save the user
mode you have selected automatically.
How to set positioning system ON/OFF
Should you wish to deactivate the positioning system proceed
as follows:
• First turn o the product.
• Press the “user” button and hold it for 5 seconds.
• If the “position system” is turned ON, the LCD will display “on”. If
the “position system” is turned OFF, the LCD will display “o”.
• Press the “user” button again, the state of “position system” will
be changed.
• When the “position system” has been set to your liking, you can
To Next Page
Loading...
