Braun TrueScan BPW4100 - Page 13

13
What to do if…
Problem Reason Solution
Battery Icon is ashing • Batteries are at.
• Memory readings can be
called up, but measure-
ments are not possible.
Insert new batteries.
Err 1 Cu is not wrapped on
the wrist well (too loose).
Rewrap the cu tighter
on the wrist.
Err 2 • Arm moved during
ination measurement.
• Systolic pressure is
above 280mmHg
Please do not move arm
or speak when you take a
measurement.
No display No information on the
display screen.
Check the battery instal-
lation for proper instal-
lation of the batteries’
polarities
Measurements appear
too high or too low
Blood pressure varies
constantly during the
day. Many factors such
as stress, time of day,
talking, coughing, laugh-
ing, moving etc. when
measuring will inuence
the reading.
Please read “Key rules for
accurate blood pressure
measurements” and
“Taking a measurement”
Prior to measurement,
the positioning system
(A) on the display does
not work.
Positioning system (A) is
deactivated.
Refer to the chapter
«Select mode» to activate
the positioning system
(A).