29
Clean&Charge Station
To prevent the cleaning fluid from leaking, ensure that the
Clean&Charge Station is placed on a flat surface. When a cleaning
cartridge is installed, do not tip, move suddenly or transport the
station in any way as cleaning fluid might spill out of the cartridge.
Do not place the station inside a mirror cabinet, nor place it on a
polished or lacquered surface.
The cleaning cartridge contains a highly flammable liquid so keep
it away from sources of ignition. Do not expose to direct sunlight
and cigarette smoking nor store it over a radiator.
Do not refill the cartridge and use only original Braun refill
cartridges.
Shaver
1 Foil & Cutter cassette
2 Cassette release button
3 MultiHeadLock switch
4 On/off switch
5 Shaver display
5 a Lock symbol (travel lock)
5 b Charging segments
5 c Cleaning indicator
5 d Battery symbol
6 Long hair trimmer
7 Shaver-to-station contacts
8 Release button for long hair trimmer
9 Shaver power socket
10 a Special cord set (design can differ)
10 b Charging stand*
11 Protection cap*
12 Travel case*
* not with all models
First use and Charging
Connect the shaver to an electrical outlet by snapping the special cord set (10a) into
the shaver power socket (9) / the charging stand (10b) or for cc models via the
Clean&Charge Station (see Chapter «Clean&Charge Station»).
90725907_Series_5-2_w&d_Japan.indd 2990725907_Series_5-2_w&d_Japan.indd 29 13.06.19 14:2213.06.19 14:22
Business Use - P&G AUTHORIZED POA-00139891 Rev 001 Effective Date 2019-06-19 Printed 2022-12-14 Page 29 of 40
To Next Page
Loading...
