What to do if Braun Pro Wet&Dry 9470cc Electric Shaver does not charge completely and keeps blinking?
If your Braun Electric Shaver isn't fully charging and keeps blinking, it could be due to the ambient temperature being outside the recommended range. Ensure the temperature is between 5 °C and 35 °C for optimal charging.
Why is my Braun Pro Wet&Dry 9470cc shaving performance dropped significantly?
If the shaving performance of your Braun Electric Shaver has significantly declined: * The foil and cutter may be worn. If so, renew the Foil & Cutter cassette. * The shaving system could be clogged. To resolve this, soak the Foil & Cutter cassette in hot water with a drop of dish liquid, then rinse it thoroughly, tap it out, and once dry, apply a drop of light machine oil to the foil.
What to do if cleaning does not start on Braun Pro Wet&Dry 9470cc?
If cleaning doesn't start when you press the start button on your Braun Electric Shaver, check the following: * Ensure the shaver is properly placed in the Clean & Charge Station, pushed to the rear so that the contacts align. * Verify the cleaning cartridge contains sufficient cleaning fluid. If the display blinks red, insert a new cleaning cartridge and press the start button again. * The appliance might be in stand-by mode. Press the start button again to initiate cleaning.
Why has the battery performance of my Braun Pro Wet&Dry 9470cc dropped significantly?
A significant drop in battery performance in your Braun Electric Shaver could stem from worn foil and cutter, requiring more power, or regular cleaning with water without lubrication. Consider renewing the Foil & Cutter cassette. If you regularly clean the shaver head with water, apply a drop of light machine oil on top of the foil once a week for lubrication.
What to do if cleaning does not start on my Braun Electric Shaver?
If cleaning doesn't start when you press the start button on your Braun Electric Shaver's Clean & Charge Station, make sure the shaver is correctly placed in the station, pushed to the rear so that the contacts align. Also, check if the cleaning cartridge has sufficient cleaning fluid; if the display blinks red, insert a new cartridge and press the start button again. Finally, if the appliance is in standby mode, press the start button again.
Why is my Braun Rechargeable shaver battery draining so fast?
If you notice a significant drop in the battery performance of your Braun Rechargeable shaver, it could be due to: * Regular cleaning with water without lubrication. * Worn foil and cutter requiring more power. To resolve this: * If you regularly clean the shaver with water, apply a drop of light machine oil on top of the foil once a week for lubrication. * Replace the Foil & Cutter cassette.
Why does my Braun Pro Wet&Dry 9470cc Electric Shaver head have an unpleasant smell?
An unpleasant smell from your Braun Electric Shaver head can occur due to: * Cleaning the shaver head with water. When cleaning with water, use only hot water and, occasionally, a bit of liquid soap (without abrasive substances). Remove the Foil & Cutter cassette to allow it to dry thoroughly. * Using the cleaning cartridge for too long. Change the cleaning cartridge at least every 8 weeks.
Why does my Braun Rechargeable shaver smell bad?
An unpleasant smell from your Braun Rechargeable shaver head may be due to: * Cleaning the shaver head with water incorrectly. * Using the cleaning cartridge for too long. To address this: * When cleaning the shaver head with water, use only hot water and, occasionally, some liquid soap (without abrasive substances). Remove the Foil & Cutter cassette and let it dry. * Change the cleaning cartridge at least every 8 weeks.
Why won't the Clean&Charge Station start on my Braun Electric Shaver?
If the cleaning cycle doesn't start when you press the start button on your Braun Electric Shaver's Clean&Charge Station, check these possible causes: 1. Ensure the shaver is correctly placed in the Clean&Charge Station, with the contacts aligned. 2. The cleaning cartridge may not have enough cleaning fluid; the level indicator will blink red. Insert a new cleaning cartridge. 3. The appliance might be in stand-by mode. Press the start button again.
Why has my Braun Pro Wet&Dry 9470cc Electric Shaver battery performance dropped significantly?
If your Braun Electric Shaver's battery performance has significantly declined, it could be due to a couple of reasons. First, the foil and cutter may be worn, requiring more power during shaving. Replacing the Foil & Cutter cassette can resolve this. Second, regular water cleaning without lubrication can also cause this issue. If you clean your shaver with water frequently, apply a drop of light machine oil on top of the foil once a week to keep it lubricated.
General| Brand | Braun |
|---|---|
| Model | Pro Wet&Dry 9470cc |
| Category | Electric Shaver |
| Language | English |
To Next Page