What to do if Braun Electric Shaver charging does not start when connected to power socket?
If charging does not start when you connect your Braun Electric Shaver to a power socket, it could be due to a few reasons. Sometimes, charging may be delayed, especially after long storage, so wait a few minutes to see if it starts automatically. Also, ensure that the ambient temperature is within the recommended range of 5 °C to 35 °C.
What to do if my Braun wet&dry 5147s-TO's battery performance has significantly dropped?
If you notice a significant drop in your Braun Electric Shaver's battery performance, it could be due to worn foil and cutter requiring more power, or the shaver head being regularly cleaned with water but not lubricated. Try renewing the Foil & Cutter cassette. If you regularly clean the shaver with water, apply a drop of light machine oil on top of the foil once a week for lubrication.
What to do if my Braun wet&dry 5147s-TO Electric Shaver isn't charging when connected to a power socket?
If your Braun Electric Shaver isn't charging, it might be due to a few reasons: sometimes charging could start delayed (e.g. after long storage), the ambient temperature is out of the recommended range, or the special cord set isn't plugged in properly. Wait a few minutes to see if charging starts automatically. Ensure the ambient temperature is between 5 °C and 35 °C. Also, make sure the special cord set snaps into place correctly.
Why has my Braun wet&dry 5147s-TO battery performance dropped significantly?
If your Braun Electric Shaver's battery performance has significantly decreased, it could be because the foil and cutter are worn, requiring more power for each shave. Replacing the Foil & Cutter cassette is recommended. Alternatively, if you regularly clean the shaver head with water but don't lubricate it, apply a drop of light machine oil on top of the foil once a week for lubrication.
Why does my Braun wet&dry 5147s-TO Electric Shaver head have an unpleasant smell?
An unpleasant smell from your Braun Electric Shaver head may be because the shaver head is cleaned with water or the cleaning cartridge has been in use for more than 8 weeks. When cleaning the shaver head with water, use only hot water and occasionally some liquid soap (without abrasive substances). Remove the Foil & Cutter cassette to let it dry. Replace the cleaning cartridge at least every 8 weeks.
Why has my Braun wet&dry 5147s-TO Electric Shaver shaving performance dropped significantly?
If you notice a significant drop in your Braun Electric Shaver's shaving performance, it might be due to worn foil and cutter. Replacing the Foil & Cutter cassette can resolve this issue. Another possible cause is a clogged shaving system. To address this, soak the Foil & Cutter cassette in hot water with a drop of dish liquid, then rinse it thoroughly, tap it out, and apply a drop of light machine oil to the foil once it's dry.
What to do if cleaning does not start when pressing the start button on Braun wet&dry 5147s-TO?
If cleaning does not start when you press the start button on your Braun Electric Shaver's Clean&Charge Station, ensure the shaver is correctly placed in the station, pushing it to the rear so that the contacts align. Also, if the cleaning cartridge doesn't contain enough cleaning fluid (display blinks red), insert a new cleaning cartridge and press the start button again.
Why is there an unpleasant smell from the Braun wet&dry 5147s-TO Electric Shaver head?
If you notice an unpleasant smell from your Braun Electric Shaver head, it could be due to cleaning the shaver head with water. When cleaning the shaver head with water, use only hot water and occasionally some liquid soap (without abrasive substances). Remove the Foil & Cutter cassette to let it dry. Also, if the cleaning cartridge has been in use for more than 8 weeks, replace it.
Why is the Braun wet&dry 5147s-TO head damp?
If your Braun Electric Shaver head is damp, it could be because the drying time after automatic cleaning was too short; clean directly after shaving to allow enough time for drying. Another reason may be that the drain of the Clean&Charge Station is clogged; clean the drain with a wooden toothpick.
Why is there increased consumption of cleaning fluid in my Braun wet&dry 5147s-TO?
If you are experiencing increased consumption of cleaning fluid with your Braun Electric Shaver, the drain of the Clean& Charge station might be clogged. Clean the drain with a wooden toothpick and regularly wipe the tub clean.
General| Brand | Braun |
|---|---|
| Model | wet&dry 5147s-TO |
| Category | Electric Shaver |
| Language | English |
To Next Page